Shelly Dimmer Gen3 WiFi Light Controller
165-076937
Pamatinformācija
The Shelly Dimmer Gen3 is a compact, single-circuit light dimmer that allows precise control of lighting brightness from a smartphone, tablet, computer or home automation system. It works over a Wi-Fi local network without the need for an additional hub, and also supports remote control via the cloud. It can work with or without a neutral wire. The device also offers Wi-Fi signal amplification, interoperability with Bluetooth and BLE Gateway, and a range of automation options, including schedules, scripts and integration with systems like Home Assistant, Google Home, Alexa or SmartThings.
Working with and without a neutral wireThe Shelly Dimmer Gen3 allows installation in both systems with and without a neutral wire, which is key when retrofitting existing installations. For operation without a neutral wire, a Bypass module is required if the load is less than 20 watts - such a solution prevents the lamp from accidentally glowing after it is turned off.
Accurate measurements and protectionWhen the neutral wire is connected, the device allows the measurement of voltage (180-240 V), current (0-3 A) and energy consumption. These measurements are made with an accuracy of ±5%. In addition, the device is equipped with an internal temperature sensor and short-circuit and overload protection. Note: these functions work properly only when connected with a neutral conductor.
Convenient control and precise dimmingThe product supports trailing edge mode, which provides smooth dimming of a wide range of light sources - from LEDs (up to 150 W) to halogen bulbs (up to 200 W) and electronic transformers. Automatic dimmer calibration guarantees a uniform dimming effect regardless of the type of light source. Built-in functions such as minimum and maximum brightness setting, transition time adjustment and night mode allow full control over lighting - both manually and through schedules.
Automation and advanced schedulesShelly Dimmer Gen3 supports up to 20 schedules and 20 webhooks (with 5 URLs for each). It allows you to create advanced scenarios using scripts and local actions. You can schedule brightness changes, transition times and set automatic light on/off. With support for MQTT, KVS and virtual components, deep integration with advanced building automation systems is possible.
General| Manufacturer | Shelly |
|---|---|
| Model | DimmerGen3 |
| Dimensions | 38 x 42.5 x 16.5 mm / 1.50 x 1.67 × 0.65 inches |
|---|---|
| Weight | 24.3 g / 0.86 oz |
| Maximum terminal tightening torque | 0.4 Nm / 3.5 lbin |
| Cable cross section | 0.2 to 2.5 mm² / 24 to 14 AWG (solid, multi-strand, sleeves) |
| Length of stripped wire | 5 to 6 mm / 0.20 to 0.24 in. |
| Mounting | Wall box |
| Housing material | Plastic |
| Case color | Green, print: black |
| Color of connectors | Black |
| Operating temperature | -20°C to 40°C / -5°F to 105°F |
|---|---|
| Operating humidity | 30% to 70% RH |
| Maximum altitude. | 2000 m / 6562 ft |
| Power supply | 220-240 V~, 50 Hz |
|---|---|
| Power consumption | < 1,5 W |
| No neutral wire | Yes |
| Minimum load without neutral wire and without Bypass | 20 W |
| Dimming type | Trailing edge |
| External protection | 16 A, characteristic B or C, 6 kA breaking capacity, energy limitation class 3 |
| Short-circuit protection | Yes |
| Maximum output power | 200 W |
|---|
| Voltage range (AC) | 180-240 V |
|---|---|
| Accuracy of voltage measurement | ±5% (when used with neutral conductor) |
| Current range (AC) | 0-3 A |
| Accuracy of current measurement | ±5 % (when used with neutral conductor) |
| Internal temperature sensor | Yes |
| Protocol | 802.11 b/g/n |
|---|---|
| RF band | 2412-2472 MHz |
| RF power | < 20 dBm |
| Range | Up to 30 m indoors / 50 m outdoors (depending on conditions) |
| Protocol | 4.2 |
|---|---|
| RF band | 2402-2480 MHz |
| Maximum RF power | < 4 dBm |
| Range | Up to 10 m indoors / 30 m outdoors (depending on conditions) |
| CPU | ESP32 C3 / STM32 G051 |
|---|---|
| Clock frequency | ESP32 C3 - 40 MHz |
| Flash memory | 8 MB |
| Schedules | 20 |
|---|---|
| Webhooks (URL shares) | 20 with 5 URLs per webhook |
| Scripts | Yes |
| MQTT | Yes |
| Advanced scheduling | Yes |
| KVS (Key-Value Store) | Yes |
Izmēri un svars
Produktu kodi
Pasūtījumiem virs 99 € Photopoint piedāvā bezmaksas piegādi Igaunijas teritorijā. Ieskatieties cilnē „Piegāde”, lai iegūtu precīzāku piegādes cenu aprēķinu.
Jūs varat izvēlēties vēlamo piegādes veidu iepirkumu grozā:
Omniva paku termināls
Jūs varat pasūtīt preces uz jebkuru no Omniva paku termināļiem. Izvēlieties vēlamo termināli iepirkumu grozā. Līdzko sūtījums ieradīsies, Jums tiks nosūtīts SMS ziņojums ar unikālu kodu. Dodieties uz termināli nedēļas laikā, ievadiet kodu un paņemiet savu sūtījumu. Tas ir tieši tik vienkārši!
Omniva paku termināļu adreses skatīt šeit. Omniva kurjera piegāde
Kurjers nogādās Jūsu preces no Photopoint tieši uz Jūsu norādīto adresi. Piegāde tiek veikta darba dienās no 08:00 līdz 17:00. Kurjers Jums piezvanīs pirms ierašanās, tāpēc turiet savu telefonu tuvumā. Lūdzu, pārliecinieties, ka piegādes galamērķī atrodas persona, kas būs ir tiesīga saņemt sūtījumu.
Prece var tikt pasūtīta tikai mūsu interneta veikalā. Piegāde sākot no 4-7 darba dienām Igaunijas teritorijā.