Fein ASCM18-4QMP N00 Cordless Combi Drill
14-876213
459 €
Pamatinformācija
Fein ASCM18-4QMP N00 cordless impact drill (without battery and without charger)
With brushless motor and QuickIN interface, uncompromising performance for tapping up to M14 and drilling with carbide hole saws up to 80 mm.
Features:
- 4-speed all-metal gearbox with speeds up to 4000 rev/min for optimum cutting speeds in metal for every bore from 1.5 to 80 mm
- The widest range of applications with the FEIN QuickIN system for multifunctional use in drilling, core drilling, tapping, countersinking and screwdriving
- Very safe working.Kickback monitoring (kickback) stops the machine
- QuickIN attachments can be changed between metal and wood applications in seconds with just one machine
- Switchable impact mechanism for drilling in stone and masonry up to 13 mm
- More control through extendable additional handle
- The brushless, powerful FEIN PowerDrive motor, with up to 30% higher efficiency, enables a longer service life
- High torques up to 130 Nm
- QuickIN solid metal drill chuck (120 Nm) with carbide-tipped jaws and high clamping forces
- Electronic torque adjustment (15+1)
- Intuitive control panel with dimmable LED for perfect illumination of the workplace depending on the material
- Ergonomic and flexible handling thanks to side-mounted bit and belt holders
- Screwed 10 x 400 mm screws without pre-drilling
- AMPShare interface allows 1 400 screw connections (5 x 40 mm in wood) per battery charge (ProCORE 4 Ah)
- Comprehensive user protection through restart protection, electronic overload protection and brake
- The innovative adjustment function allows screwing in wood at reduced speed for perfect results
- Compatible with Bosch Professional 18 V batteries since 2008 and AMPShare batteries
- Mobile working with the L-BOXX System
Technical data:
- Battery voltage: 18 V
- Battery compatibility: Li-ion / ProCore
- Battery Interface: 18 V AMP
- Motor: brushless
- Transmission: 4-speed
- Accessory interface: QuickIN MAX
- Idling speed: 430 / 850 / 2000 / 4000 U/min
- Impact rate: 6450 / 12750 / 30000 / 60000 U/min
- Maximum torque: 130 (70 / 50) Nm
- Torque levels: 15 + 1
- Chuck span: 1.5 - 13 mm
- Screws: 10 x 400 mm
- Drill-O steel twist drill: 13 mm
- Drill Steel Core Drill: 30 mm
- Drill-O steel hole saws: 80 mm
- Drill wood: 60 mm
- Drilling stone: 13 mm
- Tapping: M14
- Weight: 1.4 kg
Scope of delivery:
- 1x QuickIN drill chuck (120 Nm)
- 1x belt clip
- 1x Bitgarage
- 1x telescopic handle
- 1x plastic tool case (L-BOXX 136)
Izmēri un svars
Bruto svars
5.9 kg
Iepakojuma platums
358 cm
Produktu kodi
EAN
4014586900261
Ražotāja kods
71161661000
Pasūtījumiem virs 99 € Photopoint piedāvā bezmaksas piegādi Igaunijas teritorijā. Ieskatieties cilnē „Piegāde”, lai iegūtu precīzāku piegādes cenu aprēķinu.
Jūs varat izvēlēties vēlamo piegādes veidu iepirkumu grozā:
Omniva paku termināls
Jūs varat pasūtīt preces uz jebkuru no Omniva paku termināļiem. Izvēlieties vēlamo termināli iepirkumu grozā. Līdzko sūtījums ieradīsies, Jums tiks nosūtīts SMS ziņojums ar unikālu kodu. Dodieties uz termināli nedēļas laikā, ievadiet kodu un paņemiet savu sūtījumu. Tas ir tieši tik vienkārši!
Omniva paku termināļu adreses skatīt šeit. Omniva kurjera piegāde
Kurjers nogādās Jūsu preces no Photopoint tieši uz Jūsu norādīto adresi. Piegāde tiek veikta darba dienās no 08:00 līdz 17:00. Kurjers Jums piezvanīs pirms ierašanās, tāpēc turiet savu telefonu tuvumā. Lūdzu, pārliecinieties, ka piegādes galamērķī atrodas persona, kas būs ir tiesīga saņemt sūtījumu.
Prece var tikt pasūtīta tikai mūsu interneta veikalā. Piegāde sākot no 4-7 darba dienām Igaunijas teritorijā.