Makita Cordless impact drill HP001GD201 XGT, 40V (blue/black, 2x Li-Ion XGT battery 2.5Ah, MAKPAC)
55-1658090
659 €
Pamatinformācija
Type: impact drill
Colour: blue/black
EAN: 0088381894067
Manufacturer No.: HP001GD201
Series: XGT
Intended use: For screwing, drilling and percussion drilling, for use on construction sites
Operating mode: battery operation
Operating voltage: 40 volts
Battery system: Li-ion battery, 40 volts, 2.5 Ah
Tool holder: quick-release drill chuck, 1.5 mm - 13 mm, with auto-lock function
Operation: Electronic speed control
Handle: Additional side handle
Lighting: LED work light
Safety: AFT (Active Feedback sensing Technology), deep discharge protection, motor brake
Multi-piece set: Multiple batteries
Motor: Brushless motor
Gear stages: 2-speed gearbox
Direction of rotation: right and left rotation
Drilling capacity O max.: 76 mm
: 20mm
: 20mm
Torque: hard: 140 Nm, soft: 68 Nm
: 41 levels
Speed: 1st gear: 0 to 650 rpm, 2nd gear: 0 to 2,600 rpm
Impact rate: 1st gear: 9,750 / min, 2nd gear: 39,000 / min
Operating noise: 85 dB(A)
: 96dB(A)
: 3dB(A)
Drilling: 2.5 m/s2
Impact drilling: 6 m/s2
: 1.5 m/s2
Feature: With the XGT quick charger DC40RA (in connection with the charging adapter ADP10) the 18 volt LXT batteries can also be charged.
Additional information: The batteries in the XGT system deliver a maximum voltage of 40 volts with a compact design and low weight. They are specially designed to deliver higher discharge currents, for tough use (protection class IP56) and continuous maximum power. The XGT series sets new standards with digital communication between machine, battery and charger. The built-in processors communicate with each other during the entire operation and thus ensure an optimal level of performance and a noticeably longer battery life.
Note: Weight including battery (EPTA) 1.5 - 2.5 kg (depending on the battery used)
Accessories: MAKPAC size 3, quick charger DC40RA, 2x battery BL4025, bit holder, double bit, depth stop
: Charging adapter ADP10 for 18 volt batteries
Dimensions: Width: 86mm x Height: 275mm x Depth/Length: 182mm
Weight: 2.7kg
Colour: blue/black
EAN: 0088381894067
Manufacturer No.: HP001GD201
Series: XGT
Intended use: For screwing, drilling and percussion drilling, for use on construction sites
Operating mode: battery operation
Operating voltage: 40 volts
Battery system: Li-ion battery, 40 volts, 2.5 Ah
Tool holder: quick-release drill chuck, 1.5 mm - 13 mm, with auto-lock function
Operation: Electronic speed control
Handle: Additional side handle
Lighting: LED work light
Safety: AFT (Active Feedback sensing Technology), deep discharge protection, motor brake
Multi-piece set: Multiple batteries
Motor: Brushless motor
Gear stages: 2-speed gearbox
Direction of rotation: right and left rotation
Drilling capacity O max.: 76 mm
: 20mm
: 20mm
Torque: hard: 140 Nm, soft: 68 Nm
: 41 levels
Speed: 1st gear: 0 to 650 rpm, 2nd gear: 0 to 2,600 rpm
Impact rate: 1st gear: 9,750 / min, 2nd gear: 39,000 / min
Operating noise: 85 dB(A)
: 96dB(A)
: 3dB(A)
Drilling: 2.5 m/s2
Impact drilling: 6 m/s2
: 1.5 m/s2
Feature: With the XGT quick charger DC40RA (in connection with the charging adapter ADP10) the 18 volt LXT batteries can also be charged.
Additional information: The batteries in the XGT system deliver a maximum voltage of 40 volts with a compact design and low weight. They are specially designed to deliver higher discharge currents, for tough use (protection class IP56) and continuous maximum power. The XGT series sets new standards with digital communication between machine, battery and charger. The built-in processors communicate with each other during the entire operation and thus ensure an optimal level of performance and a noticeably longer battery life.
Note: Weight including battery (EPTA) 1.5 - 2.5 kg (depending on the battery used)
Accessories: MAKPAC size 3, quick charger DC40RA, 2x battery BL4025, bit holder, double bit, depth stop
: Charging adapter ADP10 for 18 volt batteries
Dimensions: Width: 86mm x Height: 275mm x Depth/Length: 182mm
Weight: 2.7kg
Izmēri un svars
Bruto svars
7 kg
Produktu kodi
EAN
0088381894067
Ražotāja kods
HP001GD201
Pasūtījumiem virs 99 € Photopoint piedāvā bezmaksas piegādi Igaunijas teritorijā. Ieskatieties cilnē „Piegāde”, lai iegūtu precīzāku piegādes cenu aprēķinu.
Jūs varat izvēlēties vēlamo piegādes veidu iepirkumu grozā:
Omniva paku termināls
Jūs varat pasūtīt preces uz jebkuru no Omniva paku termināļiem. Izvēlieties vēlamo termināli iepirkumu grozā. Līdzko sūtījums ieradīsies, Jums tiks nosūtīts SMS ziņojums ar unikālu kodu. Dodieties uz termināli nedēļas laikā, ievadiet kodu un paņemiet savu sūtījumu. Tas ir tieši tik vienkārši!
Omniva paku termināļu adreses skatīt šeit. Omniva kurjera piegāde
Kurjers nogādās Jūsu preces no Photopoint tieši uz Jūsu norādīto adresi. Piegāde tiek veikta darba dienās no 08:00 līdz 17:00. Kurjers Jums piezvanīs pirms ierašanās, tāpēc turiet savu telefonu tuvumā. Lūdzu, pārliecinieties, ka piegādes galamērķī atrodas persona, kas būs ir tiesīga saņemt sūtījumu.
Prece nav pieejama. Papildus informācijai par pieejamību un iepriekšēju pasūtīšanu, lūdzu, sazinieties ar mums šeit.