B+W Filter 49mm ND 1.8 MRC Nano Master
20-1101574
88,99 €
Pamatinformācija
Uzmanību: atlikušas tikai pāris preces!
B+W Filter ND 806 49 mm Master MRC Nano, six f-stops. ND filters or neutral density (ND) filters are used if too much light restricts creative possibilities. This B+W ND filter, which reduces light entering the camera by six f-stops, already qualifies as an extreme filter. With this filter, and without changing the aperture (and DOF), an exposure time of 1/60 s becomes a full second. Running water is rendered hazy and soft. A tripod is necessary in any case.
ND filters can produce wipe effects in movements if the exposure time can be extended with the required aperture. A waterfall then no longer appears to be frozen, but as a flowing motion. ND filters create ingenious effects in architecture or urban photography. With long exposure times of several hours, people walking through the shot are blurred or not reproduced at all. For physical reasons, very dense filters possess a warm tone which can be compensated in image processing.
Available with different densities
B + W ND Filters are available with several different densities, which gives the photographer the opportunity to choose a filter that suits each situation.
MRC Nano Coating
An important criteria for a perfect B+W filter is a high-quality coating, also known as an antireflection coating. With a B+W filter, such layers are evaporated by means of thin-layer technique, a quite complex coating process. The coating material consists of special substrates that are applied in one or more layers depending on the coating system.. In the MRC nano coated B+W filter, a water droplet remains practically spherical. It rolls over the surface. A first-rate dirt and water-repellent effect occurs.
Master Filter Holder
Durable and robust due to brass mount with better grip due to optimized knurl. Easier mounting due to new lacquer technology. Best choice for super wide angle – telephoto lenses.
In addition to the filter effect, the combination coating also prevents trouble-some reflections by including a multilayer anti-reflection compo-nent with seven layers on each side of the filter. Finally, an outer layer with the usual dirt- and water-repellent properties is applied. With this feature, the filter not only has all-round protection, but simple cleaning and care of the filter disk are also taken care of. The light attenuation itself is very uniform over the entire visible range and therefore produces optimal, colour-neutral images.
Stop > 8 11 16 22 32
Time > 1/500 1/250 1/25 1/60 1/30
ND 0.3 1/250 1/125 1/60 1/30 1/15
ND 0.6 1/125 1/60 1/30 1/15 1/8
ND 1.8 1/8 1/4 0.5 sec. 1 sec. 2 sec.
ND 3.0 2 sec. 4 sec. 8 sec. 15 sec. 30 sec.
Type Optical Density F-Stops Filter Factor LV %
102 802 ND 0.6 +2 4 x -2 25
103 803 ND 0.9 +3 8 x -3 12.5
106 806 ND 1.8 +6 64 x -6 1.6
110 810 ND 3.0 10 1,000 x -10 0.1
Foundation of the company “Optische Anstalt Jos. Schneider & Co.” The company, founded 1913 by Joseph Schneider, trades today under the name of Jos. Schneider Optische Werke GmbH. It manufactures for the world market high-performance lenses, photographic and industrial filters as well as professional accessories. Further product ranges are electro-hydraulic and electro-pneumatic servo valves for the machine constuction and industrial processing engineering as well as single and multiple focus lenses and graduated lenses for the ophthalmic optics. The company’s B+W brand for photo fi
ND filters can produce wipe effects in movements if the exposure time can be extended with the required aperture. A waterfall then no longer appears to be frozen, but as a flowing motion. ND filters create ingenious effects in architecture or urban photography. With long exposure times of several hours, people walking through the shot are blurred or not reproduced at all. For physical reasons, very dense filters possess a warm tone which can be compensated in image processing.
Available with different densities
B + W ND Filters are available with several different densities, which gives the photographer the opportunity to choose a filter that suits each situation.
MRC Nano Coating
An important criteria for a perfect B+W filter is a high-quality coating, also known as an antireflection coating. With a B+W filter, such layers are evaporated by means of thin-layer technique, a quite complex coating process. The coating material consists of special substrates that are applied in one or more layers depending on the coating system.. In the MRC nano coated B+W filter, a water droplet remains practically spherical. It rolls over the surface. A first-rate dirt and water-repellent effect occurs.
Master Filter Holder
Durable and robust due to brass mount with better grip due to optimized knurl. Easier mounting due to new lacquer technology. Best choice for super wide angle – telephoto lenses.
In addition to the filter effect, the combination coating also prevents trouble-some reflections by including a multilayer anti-reflection compo-nent with seven layers on each side of the filter. Finally, an outer layer with the usual dirt- and water-repellent properties is applied. With this feature, the filter not only has all-round protection, but simple cleaning and care of the filter disk are also taken care of. The light attenuation itself is very uniform over the entire visible range and therefore produces optimal, colour-neutral images.
Stop > 8 11 16 22 32
Time > 1/500 1/250 1/25 1/60 1/30
ND 0.3 1/250 1/125 1/60 1/30 1/15
ND 0.6 1/125 1/60 1/30 1/15 1/8
ND 1.8 1/8 1/4 0.5 sec. 1 sec. 2 sec.
ND 3.0 2 sec. 4 sec. 8 sec. 15 sec. 30 sec.
Type Optical Density F-Stops Filter Factor LV %
102 802 ND 0.6 +2 4 x -2 25
103 803 ND 0.9 +3 8 x -3 12.5
106 806 ND 1.8 +6 64 x -6 1.6
110 810 ND 3.0 10 1,000 x -10 0.1
Foundation of the company “Optische Anstalt Jos. Schneider & Co.” The company, founded 1913 by Joseph Schneider, trades today under the name of Jos. Schneider Optische Werke GmbH. It manufactures for the world market high-performance lenses, photographic and industrial filters as well as professional accessories. Further product ranges are electro-hydraulic and electro-pneumatic servo valves for the machine constuction and industrial processing engineering as well as single and multiple focus lenses and graduated lenses for the ophthalmic optics. The company’s B+W brand for photo fi
Produktu kodi
EAN
4012240048915
Ražotāja kods
1101574
Pasūtījumiem virs 99 € Photopoint piedāvā bezmaksas piegādi Igaunijas teritorijā. Ieskatieties cilnē „Piegāde”, lai iegūtu precīzāku piegādes cenu aprēķinu.
Jūs varat izvēlēties vēlamo piegādes veidu iepirkumu grozā:
Omniva paku termināls
Jūs varat pasūtīt preces uz jebkuru no Omniva paku termināļiem. Izvēlieties vēlamo termināli iepirkumu grozā. Līdzko sūtījums ieradīsies, Jums tiks nosūtīts SMS ziņojums ar unikālu kodu. Dodieties uz termināli nedēļas laikā, ievadiet kodu un paņemiet savu sūtījumu. Tas ir tieši tik vienkārši!
Omniva paku termināļu adreses skatīt šeit. Omniva kurjera piegāde
Kurjers nogādās Jūsu preces no Photopoint tieši uz Jūsu norādīto adresi. Piegāde tiek veikta darba dienās no 08:00 līdz 17:00. Kurjers Jums piezvanīs pirms ierašanās, tāpēc turiet savu telefonu tuvumā. Lūdzu, pārliecinieties, ka piegādes galamērķī atrodas persona, kas būs ir tiesīga saņemt sūtījumu.
Prece var tikt pasūtīta tikai mūsu interneta veikalā. Piegāde sākot no 7-10 darba dienām Igaunijas teritorijā.