Server DL380 G10+ 4309Y 64 GB 8SFF P77170-425
26-937726
Main info
Server HPE ProLiant DL380 Gen10 Plus 4309Y 8-tuumaline, 64GB RAM, 8SFF SR416i-a, 2x480GB SATA SSD, 2x800W toiteplokid, EL P77170-425 Model HPE ProLiant DL380 Gen10 Plus Server HPE ProLiant DL380 Gen10 Plus 4309Y 8-tuumaline, 64GB RAM, 8SFF SR416i-a, 2x480GB SATA SSD, 2x800W toiteplokid, EL P77170-425
| Model | HPE ProLiant DL380 Gen10 Plus |
| Chipset type | Intel C621A |
| Number of CPUs installed | 1 |
| Max supported number of processors | 2 |
| CPU series | Intel Xeon (Octo Core) |
| CPU model | 4309Y |
| CPU frequency | 2.8 |
| Number of cores | 8C |
| CPU - other information | Intel Xeon Silver 4309Y (8 core, 2.8 GHz, 105W) |
| RAM memory installed | 64 |
| Max memory size | 2 |
| Memory type | DDR4 |
| Kind of memory | Registered |
| Memory frequency | 3200 MHz |
| Number of memory slots used | 2 |
| Number of available memory slots | 31 |
| Total number of memory slots | 32 |
| RAM - other information | 64 GB (2x32 GB, 3200 MT/s)Notes: Runs at 2667 MT/s due to processor limitation |
| Network interface | 4 x 10/100/1000 Mbit/s |
| Network card - other information | Broadcom BCM5719 Ethernet 1Gb 4-port BASE-T OCP3 Adapter for HPE |
| Disk controller | Card |
| RAID levels | 60 (6+0) |
| RAID levels | 10 (1+0) |
| RAID levels | 5 |
| RAID levels | 50 (5+0) |
| RAID levels | 6 |
| RAID levels | 1 |
| Controller memory | 4 GB |
| Controller - other information | HPE SR416i-a Gen10 Plus x16 Lanes 4GB Cache NVMe/SAS 24G Controller |
| Form factor (width) | 2,5'' (SFF) |
| Hot-swapping support | Yes |
| Hard drive cage interfaces | SAS |
| Hard drive cage interfaces | NVMe |
| Hard drive cage interfaces | SATA |
| Max. number of disks in current configuration | 8 |
| Number of HDDs installed | 2 |
| Total capacity of all disks installed | 960 |
| Type of installed disc | SSD |
| HDD interface | SATA |
| Optical disk drive | None |
| Expansion slots | 2 x PCIe 4.0 x 8 |
| Expansion slots | 1 x PCIe 4.0 x 16 |
| I/O connectors | 4 x RJ-45 LAN |
| I/O connectors | 5 x USB 3.0 |
| I/O connectors | 1 x 15-pin D-Sub |
| I/O connectors | 1 x USB Service |
| I/O connectors | 1 x RJ-45 (iLO Remote Management Network) |
| Number of power supplies installed | 2 |
| Max. number of power supplies | 2 |
| Power supply output current | 800 |
| PSU efficiency | 94 |
| Hot-plug power supply support | Yes |
| Number of fans | 6 |
| Hot-plug fans support | Yes |
| Housing | Rack 2U |
| Height | 87.5 |
| Width | 445.4 |
| Depth | 710 |
| Weight | 28.77 |
| Tower to rack conversion support | No |
| Accessories included | HPE DL38X Gen10 Plus 2U SFF Easy Install Rail Kit |
| Color | Not applicable |
Dimensions and weights
Product codes
Photopoint offers free shipping for orders over 99 € delivered to Estonia. Take a look in the tab "Delivery" for a more precise delivery estimate.
For this product you can select the desired delivery method at the shopping cart:
Photopoint store Pick-up
Place your order from Photopoint web store and pick your goods up from one of Photopoint`s brick and mortar stores. The delivery to Photopoint store is free even for orders less than 99 €. You will be noticed by e-mail when your order is ready for pick-up.
The Photopoint stores are located in Tallinn and Tartu. See the exact locations from here.
Omniva courier delivery
The courier will transport your goods from Photopoint straight to the provided address. The delivery will take place at workdays from 08:00 to 17:00. Hold your phone near you as the courier will call you prior to its arrival. Please make sure there is someone at the destination, eligible to receive the shipment.
The product can only be ordered from our online store and it takes from 7-10 working days for delivery within Estonia.