Flysky Transmitter PL18 + Receiver FTR10 + Receiver FTR16S Set, 18 channels AFHDS 3
165-042298
will be applied in shopping cart
(min. 5€ purchase)
Main info
Warning: Last items in stock!
Ensure your comfort while controlling drones, fixed-wing aircraft, gliders and rotorcraft and bet on a FlySky kit! The PL18 transmitter operates at 2.4G frequency and offers up to 18 channels. An easy-to-read display provides the most important information about the device's operation. The transmitter is distinguished by its wide compatibility and 3G FRM301 RF module. It provides a resolution of up to 4096, and the linear error does not exceed 0.15%. It supports various RF communication protocols and guarantees reliable stability. Also noteworthy are its long range (up to 3 km) and specially designed handle. The kit also includes two receivers - FTR10 and FTR16S, which operate in the 2.4GHz band.
Upgraded RF technologyA 3G FRM301 module is built into the PL18 transmitter, which makes it stand out for its great compatibility with a variety of RF protocols. What's more, the device supports the AFHDS 3 3G RF FRM303 module with a transmitting power of up to 2 watts no matter where it is used - even in the mountains or by the sea. And that's still not all! It also supports the CRSF2 protocol and is compatible with the CRSF RF module. As a result, you will gain feedback on flight control parameters.
Ibus2 GPS displayEnjoy convenient access to vital information about the operation of your equipment. The PL18 is equipped with an Ibus2 GPS display (HVGA 3.5" TFT, 320 x 480), which shows the location of supported equipment using graphical parameters so that you can monitor the exact operating status of your drone, glider or other device in real time and use the data for precise control.
Wide compatibilityThe FlySky transmitter is highly compatible and can be connected to FlySky AFHDS 2A and AFHDS 3G, among others. In addition, the PL18 automatically searches for related receivers and connects to them, saving you time. This way, when controlling, you can fully focus on the flight. What's more, the transmitter offers wireless dual receiver channel extension, free wiring and dual security. Together with the power module, it can act as a redundant receiver, and in high-speed serial port mode the latency is less than 5 ms.
Efficient power supplyThe transmitter is equipped with a 4,300 mAh battery that allows up to 8 hours of operation on a single charge. You can renew the device's energy in two ways. When you charge it wired, using the micro USB interface - it will be ready to continue working in about 6 hours. On the other hand, the time it takes to charge wirelessly is about 7 hours
FTR10 and FTR16S receiversThe FTR10 and FTR16S are dual antenna receivers that operate at a frequency of 2.4 GHz. They stand out with a range of up to 3,500 meters in the air. They are designed for FS-PL18, FRM301 and FRM302 transmitters.
Included:- PL18 transmitter x1
- FTR10 receiver x1
- FTR16S receiver x1
- Micro USB cable x1
- Switch set x2
- Sunshield x1
- User manual x1
| Manufacturer | FlySky |
|---|---|
| Transmitter model | PL18 |
| Channels | 18 |
| Compatibility | Fixed-wing aircraft, helicopters, cross-country machines, engineering vehicles |
| Wireless frequency (RF) | 2.4G |
| RF power | 20 dBm (max.) |
| 2.4GHz protocol | AFHDS3 |
| Distance | up to 3 km |
| Channel resolution | 4096 |
| Battery | 1S (3.7V) / 4300mAh (built-in) |
| Charging interface | Micro USB / wireless charging |
| Charging time | wired charging: 6h (5V) / wireless charging: 7h (2A) |
| Working time | up to 8h |
| Low voltage warning | < 3.7V |
| Antenna type | Dual |
| Display | HVGA 3.5" TFT, 320 x 480 |
| Language | Chinese and English |
| Simulator | USB |
| Data interface | USB, custom interface (USART), PHJACK (PPM) |
| Operating temperature | -10°C to 60°C |
| Humidity range | 20% to 95% |
| Online update | Yes |
| Transmitter color | Black |
| Dimensions (length x width x height) | 214 x 86.5 x 192 mm |
| Weight of the body | 946 g |
| Certifications | CE, FCC ID: N4ZFT1800, RCM |
| Receiver model | FTR10 |
| Compatibility | FS-PL18, FRM301, FRM302 |
| Number of PWM channels | 10 |
| Wireless frequency | 2.4GHz |
| Wireless protocol | AFHDS 3 |
| Range | up to 3500 m (air) |
| Antenna type | Dual (103 mm x2) |
| Power | 3.5-12V |
| RSSI | Supported |
| Output signal | PWM / PPM / i.bus / s.bus / UART |
| Operating temperature | From -10℃ to 60℃ |
| Humidity range | 20% to 95% |
| Online update | Yes |
| Dimensions | 52 x 28 x 22 mm |
| Weight | 22 g |
| Certifications | CE, RCM, FCC ID: N4ZFTR1000 |
| Receiver model | FTR16S |
| Compatibility | FS-PL18, FRM301, FRM302 |
| PWM channels | None |
| Wireless network frequency | 2.4GHz |
| Wireless protocol | AFHDS 3 |
| Range | up to 3500 m (air) |
| Antenna type | Dual (92.5 mm x2) |
| Power | 3.5-8.4V |
| RSSI | Supported |
| Output signal | i.bus / s.bus / PPM |
| Operating temperature | From -10℃ to 60℃ |
| Humidity range | 20% to 95% |
| Online update | Yes |
| Dimensions | 20 x 12 x 3.1 mm |
| Weight | 2 g |
| Certifications | CE, RCM, FCC ID: N4ZFTR16S00 |
Dimensions and weights
Product codes
Photopoint offers free shipping for orders over 99 € delivered to Estonia. Take a look in the tab "Delivery" for a more precise delivery estimate.
For this product you can select the desired delivery method at the shopping cart:
Photopoint store Pick-up
Place your order from Photopoint web store and pick your goods up from one of Photopoint`s brick and mortar stores. The delivery to Photopoint store is free even for orders less than 99 €. You will be noticed by e-mail when your order is ready for pick-up.
The Photopoint stores are located in Tallinn and Tartu. See the exact locations from here.
Omniva parcel terminal
You can order the goods to one of the Omniva Parcel terminals. Choose the desired terminal at the shopping cart. As the shipment arrives to the selected terminal, you will be sent an SMS-notification with an unique code. Go to the terminal within a week, enter the code and take your package. It is as simple as that.
See Omniva Parcel terminal locations here.
SmartPOST parcel terminal
Did not find an Omniva terminal at suitable location? Try SmartPost. Choose the desired terminal at the shopping cart. As the shipment arrives to the selected terminal, you will be sent an SMS-notification with an unique code. Go to the terminal within a week, enter the code and take your package. This method actually works for all parcel terminals.
See SmartPOST parcel terminal locations here.
DPD parcel locker
Make sure you check out also the locations of DPD parcel lockers. These are located all over Estonia. The delivery is the same. As the shipment arrives to the selected locker, you will be sent an SMS with a unique code. Go to the locker, enter the code and take your package.
See DPD parcel locker locations here.
Smartpost Finland parcel terminal
SmartPOST Finland is the best way to order goods to Finland. These terminals work the same way as in Estonia. As the shipment arrives to the selected terminal in Finland, you will be sent an SMS-notification with an unique code. Go to the terminal, enter the code and take your package.
See SmartPOST Finland parcel terminal locations here.
Matkahuolto parcel service
Matkahuolto is easy way to order goods to Finland. These are located also in smaller Finnish towns. As the shipment arrives to the selected Matkahuolto outlet, you will be sent an SMS-notification or an e-mail. Go to the outlet, show your ID and take your package.
See Matkahuolto outlet locations here.
Omniva courier delivery
The courier will transport your goods from Photopoint straight to the provided address. The delivery will take place at workdays from 08:00 to 17:00. Hold your phone near you as the courier will call you prior to its arrival. Please make sure there is someone at the destination, eligible to receive the shipment.
The product can only be ordered from our online store and it takes from 4-7 working days for delivery within Estonia.