PoE+ Injector 802.3at DN-95132
26-885658
FREE SHIPPING
WITHIN ESTONIA!
Main info
The effective connection distance is 100 meters on Cat5e/Cat6 cable. The solution is small but very effective.
The DN-95132 is an active indoor PoE midspan injector power supply designed specifically for complex backhaul and networking applications. Provides 52 V DC, 0.58 A power for external devices requiring PD power through 2 pairs of output sockets. The solution supports both 10/100 Base-T and Gigabit compatible devices. The solution works with devices that support PD PoE with a power of 30 W, such as wireless access points, WLAN routers, network cameras, IP phones, radio devices and other end devices compatible with power over Ethernet. The solution is fully compliant with the PoE IEEE802.3af standard. The device has a plastic housing protected against fire with a protection level of IP40. The solution supports a wide input voltage range of 100-240 V AC, 50 or 60 Hz. It has a detection chip inside that recognizes and classifies a power-demanding device (PD) before power is supplied to that device. Provides power only when a device supporting the PD (Power Delivery) standard is detected.
- provides 52 V DC, 0.58 A power for external devices requiring PD power through 2 pairs of output sockets
- support for both 10/100 Base-T and Gigabit compatible devices
- the solution supports a wide input voltage range of 100-240 V AC, 50 or 60 Hz
- Easy-to-use combination of power and data cables in one cable
- Each output port offers output current limit function, short circuit protection, full powered device detection and classification (PD)
- Injector can be used regardless of the operating system
| I/O ports | 1 x 10/100/1000 Mbit/s |
| I/O ports | 1 x 10/100/1000 Mbit/s PoE |
| Output voltage | 52 |
| Rated current | 580 |
| Output power | 30 |
| Input voltage range | 100~240 VAC 47~63 Hz |
| Accessories included | 1 x network cable 1 x User Manual |
| Height | 34 |
| Width | 56 |
| Depth | 107.3 |
| Weight | 146.8 |
| Other features | IEEE802.3 10Base-T Ethernet IEEE802.3u 100Base-Tx Fast Ethernet IEEE802.3ab 1000Base-T Gigabit Ethernet Full compatibility with the IEEE802.3af/at PoE standard RoHS compliant WEEE compliant Input: 100-240V AC 1.0A 50/60Hz Output: 52V DC 580mA Power pins: |
Dimensions and weights
Product codes
Photopoint offers free shipping for orders over 99 € delivered to Estonia. Take a look in the tab "Delivery" for a more precise delivery estimate.
For this product you can select the desired delivery method at the shopping cart:
Photopoint store Pick-up
Place your order from Photopoint web store and pick your goods up from one of Photopoint`s brick and mortar stores. The delivery to Photopoint store is free even for orders less than 99 €. You will be noticed by e-mail when your order is ready for pick-up.
The Photopoint stores are located in Tallinn and Tartu. See the exact locations from here.
Omniva parcel terminal
You can order the goods to one of the Omniva Parcel terminals. Choose the desired terminal at the shopping cart. As the shipment arrives to the selected terminal, you will be sent an SMS-notification with an unique code. Go to the terminal within a week, enter the code and take your package. It is as simple as that.
See Omniva Parcel terminal locations here.
SmartPOST parcel terminal
Did not find an Omniva terminal at suitable location? Try SmartPost. Choose the desired terminal at the shopping cart. As the shipment arrives to the selected terminal, you will be sent an SMS-notification with an unique code. Go to the terminal within a week, enter the code and take your package. This method actually works for all parcel terminals.
See SmartPOST parcel terminal locations here.
DPD parcel locker
Make sure you check out also the locations of DPD parcel lockers. These are located all over Estonia. The delivery is the same. As the shipment arrives to the selected locker, you will be sent an SMS with a unique code. Go to the locker, enter the code and take your package.
See DPD parcel locker locations here.
Smartpost Finland parcel terminal
SmartPOST Finland is the best way to order goods to Finland. These terminals work the same way as in Estonia. As the shipment arrives to the selected terminal in Finland, you will be sent an SMS-notification with an unique code. Go to the terminal, enter the code and take your package.
See SmartPOST Finland parcel terminal locations here.
Matkahuolto parcel service
Matkahuolto is easy way to order goods to Finland. These are located also in smaller Finnish towns. As the shipment arrives to the selected Matkahuolto outlet, you will be sent an SMS-notification or an e-mail. Go to the outlet, show your ID and take your package.
See Matkahuolto outlet locations here.
Omniva courier delivery
The courier will transport your goods from Photopoint straight to the provided address. The delivery will take place at workdays from 08:00 to 17:00. Hold your phone near you as the courier will call you prior to its arrival. Please make sure there is someone at the destination, eligible to receive the shipment.
The product can only be ordered from our online store and it takes from 7-10 working days for delivery within Estonia.