ARCTIC P12 PWM PST Semi-Passive Case Fan, 4-pin, 120mm, Black
158-ARCOMP12PW45
will be applied in shopping cart
(min. 4€ purchase)
Main info
A-RGB for Full Color Control The P12 PWM PST A-RGB has 12 A-RGB LEDs in the center fan circle. They can be controlled independently of each other and are compatible with the main A-RGB standards of leading motherboard manufacturers. So the fan can be fully lit directly through the A-RGB connector on the motherboard or through an external controller and synchronized with the lighting of other hardware. Case fan P12 PWM PST A-RGB, 4-pin, 120mm, black
Features:
- A-RGB for Full Color Control The P12 PWM PST A-RGB has 12 A-RGB LEDs in the center fan circle. They can be controlled independently of each other and are compatible with the main A-RGB standards of leading motherboard manufacturers. So the fan can be fully lit directly through the A-RGB connector on the motherboard or through an external controller and synchronized with the lighting of other hardware.
- PWM PST technology allows you to connect multiple fans (up to 5 are recommended), synchronizing their operating speed based on the actual cooling needs of the computer. In this way, the entire cooling system runs more efficiently and quietly, and the overall energy consumption is lower than if each fan/cooler was connected separately.
- Dynamically adjustable speed. Fan speed can be reduced to 0dB using PWM. This allows quiet operation at idle while guaranteeing maximum performance when needed.
- Optimized for static pressure. When developing the new P12 PWM PST A-RGB fan, special attention was paid to focused airflow, static pressure. This fan guarantees particularly efficient cooling, even with increased air resistance.
- High quality bearing. The combination of alloy and grease developed in Germany reduces friction in the bearing and provides greater efficiency. This results in less heat and less bearing noise, and you can enjoy a longer life for your fan.
- Maximum silence, minimum vibration. Even at low speeds, the working sound of the new ARCTIC engine is barely noticeable. Thanks to the sinusoidal magnetization, the new motor is very smooth and almost vibration-free, producing only about 5% of the vibration level of a conventional DC motor without a filter.
- 200-2000 rpm speed, adjustable by PWM. Thanks to the 4 pins, the speed can be adjusted over a wide range via PWM (pulse width modulation). In this way, noise is kept to a minimum and maximum cooling efficiency is ensured when needed.
- Long service life. The excellent results of long-term tests, even in particularly unfavorable conditions, ensure that these products are characterized not only by quality, but also by durability.
Technical data:
- Speed: 200-2000 rpm.
- Airflow: 48.8 CFM / 82.91 m³/h.
- Static pressure: 1.85 (mm/H2O).
- Noise level: 0.3 Sone.
- Bearing: Fluid dynamic bearing.
- Voltage/current: 0.11A/ 12V DC.
- Initial voltage: 5V.
- Connection: 4-pin + 4-pin sockets.
- LED: 12x A-RGB.
- A-RGB connector: 3-Pin 5V-DI-Gnd.
- A-RGB current/voltage: 0.4A / 5V.
- Cable length: 400 mm.
- Dimensions: 120x120x25 mm.
- Color: black body, optional lighting.
- Weight: 131 g.
Dimensions and weights
Product codes
Photopoint offers free shipping for orders over 99 € delivered to Estonia. Take a look in the tab "Delivery" for a more precise delivery estimate.
For this product you can select the desired delivery method at the shopping cart:
Photopoint store Pick-up
Place your order from Photopoint web store and pick your goods up from one of Photopoint`s brick and mortar stores. The delivery to Photopoint store is free even for orders less than 99 €. You will be noticed by e-mail when your order is ready for pick-up.
The Photopoint stores are located in Tallinn and Tartu. See the exact locations from here.
Omniva parcel terminal
You can order the goods to one of the Omniva Parcel terminals. Choose the desired terminal at the shopping cart. As the shipment arrives to the selected terminal, you will be sent an SMS-notification with an unique code. Go to the terminal within a week, enter the code and take your package. It is as simple as that.
See Omniva Parcel terminal locations here.
SmartPOST parcel terminal
Did not find an Omniva terminal at suitable location? Try SmartPost. Choose the desired terminal at the shopping cart. As the shipment arrives to the selected terminal, you will be sent an SMS-notification with an unique code. Go to the terminal within a week, enter the code and take your package. This method actually works for all parcel terminals.
See SmartPOST parcel terminal locations here.
DPD parcel locker
Make sure you check out also the locations of DPD parcel lockers. These are located all over Estonia. The delivery is the same. As the shipment arrives to the selected locker, you will be sent an SMS with a unique code. Go to the locker, enter the code and take your package.
See DPD parcel locker locations here.
Smartpost Finland parcel terminal
SmartPOST Finland is the best way to order goods to Finland. These terminals work the same way as in Estonia. As the shipment arrives to the selected terminal in Finland, you will be sent an SMS-notification with an unique code. Go to the terminal, enter the code and take your package.
See SmartPOST Finland parcel terminal locations here.
Matkahuolto parcel service
Matkahuolto is easy way to order goods to Finland. These are located also in smaller Finnish towns. As the shipment arrives to the selected Matkahuolto outlet, you will be sent an SMS-notification or an e-mail. Go to the outlet, show your ID and take your package.
See Matkahuolto outlet locations here.
Omniva courier delivery
The courier will transport your goods from Photopoint straight to the provided address. The delivery will take place at workdays from 08:00 to 17:00. Hold your phone near you as the courier will call you prior to its arrival. Please make sure there is someone at the destination, eligible to receive the shipment.
The product can only be ordered from our online store and it takes from 7-10 working days for delivery within Estonia.