Godox WMicS2 Kit 1 UHF Wireless Microphone System
127-D241901
will be applied in shopping cart
(min. 10€ purchase)
Main info
The WMicS2 is a wireless system with one transmitters with tie pipe microphones and a dual channel receiver. Designed specifically for mobile journalists, videographers and vloggers, it provides reliable transmission of clear sound up to 200 metres over 96 selectable UHF frequencies directly to your camera, mixer or smartphone with a 3.5mm port. This system offers a complete solution for recording dialogues, interviews or lectures with plug and play operation for easy use.
The clip on transmitter features a built in microphone and a 3.5mm port for the included omnidirectional tie pin microphones that can be attached to a collar or shirt. You can also record backup audio via the transmitters' TF card slots, so you can record worry free audio. Built in features such as a low cut filter and mute can be controlled via the buttons provided.
The dual channel receiver can record in both mono and stereo mode. Both units come with rear clips and magnetic mounts to be discreetly attached to the videographer or subject. They also have 1/4" 20 threads to be mounted on compatible cold shoe adapters. Internal 770mAh lithium batteries power all components and an included case recharges them when empty. Two USB cables and two foam windshields for the transmitters are also included.
The WMicS2 is equipped with an OLED display and advanced features such as a screen flip, real time monitoring, mute button and 10 level volume control, giving even beginners full control over the sound. ,
Model: WMicS2 TX2
Group: A/B
Channel: 96 (Group A: 48;Group B: 48)
RF Frequency Range: 514.56MHz 553.92MHz
Audio Frequency Range: 40Hz 18KHz
Sound Delay: 12ms
Audio Input Port: 3.5mm
Lithium Battery Capacity: 770mAh
Type C Input Parameters: 5V/0.4A
Working Temperature Range: 10~45â
Receiving Distance: Barrier free receiving distance: 200m, Barriered receiving distance: 60m
Signal Noise Ratio: â70dB
Dimension: 65.8x50.4x20.5mm (Antenna length:65mm)
Model: WMicS2 RX2
Group: A/B
Channel: 96 (Group A: 48;Group B: 48)
RF Frequency Range: 514.56MHz 553.92MHz
Audio Frequency Range: 40Hz 18KHz
Sound Delay: 12ms
Audio Input Port: 3.5mm
Lithium Battery Capacity: 770mAh
Type C Input Parameters: 5V/0.4A
Working Temperature Range: 10~45â
Receiving Distance: Barrier free receiving distance: 200m, Barriered receiving distance: 60m
Signal Noise Ratio: â70dB
Receive Sensitivity: 95dBm
Distortion: Below 3%
Dimension: 65.8x58.4x20.5mm (Antenna length:65mm)
Model: WM C
Lithium Battery Capacity: 10000mAh
Type C Input Parameters: 5V/0.4A
Working Temperature Range: 10~45â
Dimension: 185.8x84.2x42mm (Antenna length:65mm)
,
x WMicS2 TX2
1x WMicS2 RX2
1x UHF Charging case WM C
1x Windscreen
2x Back clip
2x Magnetic Plate
1x Type C to Type C cable
1x 3.5mm TRS TRRS audio Connect Cable
1x 3.5mm TRS TRS Audio connect Cable
1x Triple head Type C to USB Cable
1x Strap for the Charging Case
1x Omnidirectional Lavalier Microphone LMS 12B AXL
Product codes
Manufacturer
Photopoint offers free shipping for orders over 99 € delivered to Estonia. Take a look in the tab "Delivery" for a more precise delivery estimate.
For this product you can select the desired delivery method at the shopping cart:
Photopoint store Pick-up
Place your order from Photopoint web store and pick your goods up from one of Photopoint`s brick and mortar stores. The delivery to Photopoint store is free even for orders less than 99 €. You will be noticed by e-mail when your order is ready for pick-up.
The Photopoint stores are located in Tallinn and Tartu. See the exact locations from here.
Omniva parcel terminal
You can order the goods to one of the Omniva Parcel terminals. Choose the desired terminal at the shopping cart. As the shipment arrives to the selected terminal, you will be sent an SMS-notification with an unique code. Go to the terminal within a week, enter the code and take your package. It is as simple as that.
See Omniva Parcel terminal locations here.
SmartPOST parcel terminal
Did not find an Omniva terminal at suitable location? Try SmartPost. Choose the desired terminal at the shopping cart. As the shipment arrives to the selected terminal, you will be sent an SMS-notification with an unique code. Go to the terminal within a week, enter the code and take your package. This method actually works for all parcel terminals.
See SmartPOST parcel terminal locations here.
DPD parcel locker
Make sure you check out also the locations of DPD parcel lockers. These are located all over Estonia. The delivery is the same. As the shipment arrives to the selected locker, you will be sent an SMS with a unique code. Go to the locker, enter the code and take your package.
See DPD parcel locker locations here.
Smartpost Finland parcel terminal
SmartPOST Finland is the best way to order goods to Finland. These terminals work the same way as in Estonia. As the shipment arrives to the selected terminal in Finland, you will be sent an SMS-notification with an unique code. Go to the terminal, enter the code and take your package.
See SmartPOST Finland parcel terminal locations here.
Matkahuolto parcel service
Matkahuolto is easy way to order goods to Finland. These are located also in smaller Finnish towns. As the shipment arrives to the selected Matkahuolto outlet, you will be sent an SMS-notification or an e-mail. Go to the outlet, show your ID and take your package.
See Matkahuolto outlet locations here.
Omniva courier delivery
The courier will transport your goods from Photopoint straight to the provided address. The delivery will take place at workdays from 08:00 to 17:00. Hold your phone near you as the courier will call you prior to its arrival. Please make sure there is someone at the destination, eligible to receive the shipment.
The product can only be ordered from our online store and it takes from 7-10 working days for delivery within Estonia.